AFM Probes »

PPP-CONTR

Order Code / Price*

Quantity

PPP-CONTR-10 Box of 10 AFM Probes

381 381.00 USD

Volume Discount Available [?]

PPP-CONTR-20 Box of 20 AFM Probes

681 681.00 USD

Your volume discount is 81.00 USD or 10.60%

PPP-CONTR-50 Box of 50 AFM Probes

1503 1503.00 USD

Your volume discount is 402.00 USD or 21.10%

PPP-CONTR-W Box of 380 AFM Probes

7891 7891.00 USD

Your volume discount is 6587.00 USD or 45.50%

Price shown as ex-works and subjected to shipping charges, insurance, local VAT and custom duties respectively where applicable

Front view SEM image of PointProbe® Plus AFM tip

Close-up view SEM image of PointProbe® Plus AFM tip

PPP-CONTR

Name: PPP-CONTR-10 Standard Contact Mode AFM Probe
Brand: NANOSENSORS
SKU: PPP-CONTR-10
Price: 381 USD
Availability: InStock

best of the best

Standard Contact Mode AFM Probe

Manufacturer: NANOSENSORS

Coating: Reflective Aluminum
AFM tip shape: Standard

AFM Cantilever

F 13 kHz

C 0.2 N/m

L 450 µm

*nominal values

Applications

Contact Mode AFM Probes

How to optimize AFM scan parameters

The PointProbe^® Plus (PPP) combines high application versatility and compatibility with most commercial SPMs. The typical AFM tip radius of less than 7 nm and the minimized variation in AFM tip shape provide reproducible images and enhanced resolution.

NANOSENSORS^™PPP-CONTR AFM probes are designed for contact mode (repulsive mode) AFM imaging. This sensor can also be used for force-distance spectroscopy mode or pulsed force mode (PFM). The PPP-CONTR type is optimized for high sensitivity due to a low force constant.

The AFM probe offers unique features:

excellent AFM tip radius of curvature
highly doped silicon to dissipate static charge
Al coating on detector side of AFM cantilever
high mechanical Q-factor for high sensitivity

This AFM probe features alignment grooves on the back side of the holder chip.

The reflective coating is an approximately 30 nm thick aluminum coating on the detector side of the AFM cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the AFM cantilever. As the coating is nearly stress-free the bending of the AFM cantilever due to stress is less than 2 degrees.

AFM Tip:

Shape: Standard

Radius: < 7 nm (< 10 nm guaranteed)

AFM Cantilever:

Shape: Beam

Force Constant: 0.2 N/m (0.02 - 0.77 N/m)*

Resonance Frequency: 13 kHz (6 - 21 kHz)*

Length: 450 µm (440 - 460 µm)*

Width: 50 µm (42.5 - 57.5 µm)*

Thickness: 2 µm ( 1 - 3 µm)*

* guaranteed range