Q-WM300 datasheet
AFM Probe Type:
Q-WM300
Premounted on a T-Plate for Quesant AFM systems
Product Description:
Rotated, monolithic silicon AFM probe for non-contact high frequency applications (intermittent contact, tapping in air);
Symmetric tip shape;
The AFM holder chip fits most commercial AFMs as it is industry standard size. It is compatible with DI/Veeco AFMs, TM Microscopes, JEOL, Molecular Imaging, and other commercial atomic force microscopes (AFMs). Chipsize: 3.4 x 1.6 x 0.3 mm
Consistent high quality at a lower price!
Symmetric tip shape;
The AFM holder chip fits most commercial AFMs as it is industry standard size. It is compatible with DI/Veeco AFMs, TM Microscopes, JEOL, Molecular Imaging, and other commercial atomic force microscopes (AFMs). Chipsize: 3.4 x 1.6 x 0.3 mm
Consistent high quality at a lower price!
Premounted AFM probe on a Quesant T-plate for Quesant AFM systems. Based on a BudgetSensors Tap300Al AFM probe.
Application Modes:
AFM Probe Specifications:
AFM Cantilevers:
| Shape | Length | Width | Thickness | Force Const. | Res. Freq. |
|---|---|---|---|---|---|
| beam | 125 µm(115 - 135 µm)* | 30 µm(25 - 35 µm)* | 4 µm(3 - 5 µm)* | 40 N/m(20 - 75 N/m)* | 300 kHz(200 - 400 kHz)* |
AFM Tips:
| Shape | Tip Height | Tip Set Back | Tip Radius | Half Cone Angles |
|---|---|---|---|---|
| Rotated | 17 µm(15 - 19 µm)* | 15 µm(10 - 20 µm)* | <10 nm | 20°-25° along cantilever axis 25°-30° from side 10° at the apex |
* typical range
Coating:
Aluminium reflex coating on detector side of the cantilever, 30 nm thickSensors Datasheets:
No datasheet
Purchasing Info:
Product Availability: |
From stock. |
Price Description: |
No taxes applied except 5% in South Carolina. |
