Tap190Al-G datasheet
AFM Probe Type:
Tap190Al-G 
Product Description:
Rotated, monolithic silicon AFM probe for non-contact high frequency applications (intermittent contact, tapping in air);
Symmetric tip shape;
The AFM holder chip fits most commercial AFMs as it is industry standard size. It is compatible with DI/Veeco AFMs, TM Microscopes, JEOL, Molecular Imaging, and other commercial atomic force microscopes (AFMs). Chipsize: 3.4 x 1.6 x 0.3 mm
BudgetSensors' Tap190-G features a longer cantilever and it's meant as an alternative to BudgetSensors' Tap300 probes series, when the feedback loop of the AFM system doesn't accept high frequencies (400 kHz) or when the detection system needs a minimum cantilever length > 125 µm. The scanning speed of Tap190 series AFM probes is slightly slower than the scanning speed of the Tap300 series.
Consistent high quality at a lower price!
This product features alignment grooves on the backside of the holder chip.
Application Modes:
AFM Probe Specifications:
AFM Cantilevers:
| Shape | Length | Width | Thickness | Force Const. | Res. Freq. |
|---|---|---|---|---|---|
| beam | 225 µm(213 - 237 µm)* | 38 µm(29 - 47 µm)* | 7 µm(6 - 8 µm)* | 48 N/m(20 - 100 N/m)* | 190 kHz(130 - 250 kHz)* |
AFM Tips:
| Shape | Tip Height | Tip Set Back | Tip Radius | Half Cone Angles |
|---|---|---|---|---|
| Rotated | 17 µm(15 - 19 µm)* | 15 µm(10 - 20 µm)* | <10 nm | 20°-25° along cantilever axis 25°-30° from side 10° at the apex |
* typical range
Coating:
Aluminium reflex coating on detector side of the cantilever, 30 nm thick
Sensors Datasheets:
No datasheet
Purchasing Info:
Product Availability: |
From stock |
Price Description: |
* FREE for orders valued more than 500 EUR. |
Terms and Conditions for BudgetSensors