AFM Tip PPP-LM-MFMR

PPP-LM-MFMR datasheet

manufacturer:

www.nanosensors.com

View this AFM Tip
on manufacturer's website

AFM Probe Type: PPP-LM-MFMR

Product Description:

The NANOSENSORS^™ PPP-LM-MFMR AFM probe is designed for magnetic force microscopy with reduced disturbance of the magnetic sample by the tip and enhanced lateral resolution - compared to the standard PPP-MFMR probe. The force constant of this probe type is specially tailored for magnetic force microscopy yielding high force sensitivity while simultaneously enabling tapping mode and lift mode operation.
The hardmagnetic coating on the tip is characterized by a coercivity of app. 250 Oe and a remanence magnetization of app. 150 emu/cm3 (these values were determined on a flat surface).

    The SPM probe offers unique features:
        - hard magnetic coating on the tip side (coercivity of app. 250 Oe, remanence magnetization
          of app. 150 emu/cm3)
        - effective magnetic moment 0.5x of standard probes
        - metallic electrical conductivity
        - excellent tip radius of curvature
        - magnetic resolution better than 35 nm
        - Al coating on detector side of cantilever enhancing the reflectivity of the laser beam
          by a factor of about 2.5
        - precise alignment of the cantilever position (within +/- 2 µm) in conjunction with the usage
          of the alignment chip
        - compatible with PointProbe® Plus XY-Alignment Series

This product features alignment grooves on the backside of the holder chip.

Application Modes:

Magnetic Force AFM Probes (MFM)

AFM Probe Specifications:

AFM Cantilevers:

Shape	Length	Width	Thickness	Force Const.	Res. Freq.
beam	225 µm(215 - 235 µm)*	28 µm(20 - 35 µm)*	3 µm(2 - 4 µm)*	2.8 N/m(0.5 - 9.5 N/m)*	75 kHz(45 - 115 kHz)*

AFM Tips:

Shape
Standard

* guaranteed range

Coating:

As both coatings are almost stress-free the bending of the cantilever due to stress is less than 3.5% of the cantilever length. For enhanced signal strength the magnetization of the tip by means of a strong permanent magnet prior to the measurement is recommended.

Sensors Datasheets:

Datasheet for all AFM probes with sets of 10 or 20 probes.

Purchasing Info:

Product Availability:	From stock
Price Description:	Does not include VAT or customs duties.Include shipping within the EU for orders with an order value of more than 500,- €.

Order:

Order Code	Sensors per Set	price, EUR
PPP-LM-MFMR-10	10 pcs	596.00
PPP-LM-MFMR-20	20 pcs	1067.00
PPP-LM-MFMR-50	50 pcs	2352.00

You are not logged in!
Log in to place your order!

e-mail:

pass:

your Basket is EMPTY

adding product
to shopping cart...

Terms and Conditions for NANOSENSORS